SQG Steel / Steel Base Alloy Series
SQG Steel / Steel series dimensions and technical data
İnceleBall joint rod ends have a ball joint housing with a sphered convex inside surface and a ball joint shank with a correspondingly sphered but concave outside surface. Ball joint housing is with left or right-hand thread. There are two kinds of sliding contact surfaces: steel to steel and steel to zinc base alloy.
Ball joint housing is made of zinc base alloy or carbon steel, ball joint shank is made of a steel ball and a stud which is joined by precision welding, it has characteristics of self-aligning, wear-resistance and easy mounting.
Shank or housing of ball joint
d mm | ∆dmp um | ∆h1s um | |||
over | incl. | max. | min. | max. | min. |
- | 6 | 0 | -30 | +800 | -1200 |
6 | 10 | 0 | -36 | +800 | -1200 |
10 | 18 | 0 | -43 | +800 | -1200 |
18 | 30 | 0 | -52 | +800 | -1200 |
Rings of ball joint housing
D mm | ∆Dmp um | ∆Cs um | |||
over | incl. | max. | min. | max. | min. |
10 | 18 | 0 | -27 | +100 | -100 |
18 | 30 | 0 | -33 | +100 | -100 |
30 | 50 | 0 | -39 | +100 | -100 |
Type | Group normal umm | ||
min. | max. | ||
SQD | 20 | 80 | |
SQZ -RS | 0 | 30 | |
SQ -RS, SQY -RS | 20 | 60 | |
SQG | 0 | 80 |
Fits of ball joint rod ends
Thread
Male thread | Female thread |
6g | 6H |